- Eastwood MP200i Multi Process Welder
Eastwood MP200i Multi Process Welder
Item #20489 Brand: Eastwood
This is a true “one machine does it all” welder! MIG, Stick or TIG weld all from a single compact, space-saving unit.
- One machine does it all! No need to buy and store separate MIG, TIG or Stick welders
- Weld everything from thin body panels to frames, tubing and heavy plate steel up to: MIG = 3/8”, TIG = ¼” and Stick/ARC = ¼”
- Weld aluminum up to ¼” with the optional Eastwood #20518 Spool Gun Kit
- Inverter Technology provides high power in a light, compact unit. Weighs less than 30 lbs. (13kg.). Power it with a generator and weld anywhere
- 30-220 Amp output, 220 volt, 36 Amp input, 50/60 Hz
- Dual Digital output displays
- MIG / Flux Function, the peak amperage is 200 amps with a duty cycle of 20% at the full 200 amps
- TIG / Stick Function, the peak amperage is 175 amps with a duty cycle of 30% at 160 amps
- Backed by Eastwood's no-hassle 3-year warranty
The Inverter Technology efficiently allows welding all types of steel from thin gauge to heavier pieces with equal ability. Add an optional Eastwood 20518 Spool Gun and weld aluminum too.
Get the Eastwood MP200i and have it all. Weld quick and clean with MIG weld where you do not have shielding gas with Stick or lay dimes on the TIG setting. This machine does it all especially when you add the optional spool gun. 200 amps of inverter power. Efficient power consumption. Usable in 50 and 60hz power. Perfect for generator power. Duty cycle of 20% at 200amps MIG TIG and Stick welding Spool Gun optional Dual Digital display Easy to read and set amperage and wire speed for repeatable welds every time. Spot timer for replicating spot or stitch welds from 0.1 to 10 seconds.
1 – MP200i Welder
1 - Shielding Gas Regulator
1 - Shielding Gas Hose, 4.6’ [1.4m]
1 - Ground Clamp with 10’ [3m] Cable
1 - MIG Torch with 9’ [2.75m] Cable
1 - Electrode Holder with 12.5’ [3.8m] Cable
1 - TIG Torch with 10’ [3m] cable, 14’ [4.3m] Gas Line
1 - #4 Gas Nozzle (1/4”)
1 - #5 Gas Nozzle (5/16”)
1 - #6 Gas Nozzle (3/8”) (Installed)
1 - Short Black Cap (Installed)
1 - Long Black Cap
1 - Collet Body, 1/8” [3.2mm] (Installed)
3 – Collets, 1/16” [1.6mm] (1 - Installed)
1 – 1/16” x 6” Tungsten (Gray)
1 – Welding Wire Spool, 2lb., 0.030” Solid Wire
5 – Welding Rods, 1/8” E6013
1 - Instruction Manual
Output Amperage: 30-200A DC
No Load Voltage: 69V
Rated Input Current: 36A
Input Voltage: 1ph, 220/240 VAC, 60Hz
Rated Duty Cycle: 20%@200 Amps
Weight: 28 lbs. (13 kg.)
Overall Dimensions: 17.7" x 9.4" x 13.8"
MIG Welding Wire
Solid: 0.023-0.035" (0.6-0.9mm)
Stainless: 0.023-0.035" (0.6-0.9mm)
Flux Core: 0.030-0.035" (0.8-0.9mm)
Spool Gun Welding Wire
4043 Aluminum: 0.030-0.035" (0.8-0.9mm)
ARC Welding Rods
E6010: 1/16",3/32",1/8" - Polarity: DCEN
E6011: 1/16",3/32",1/8" - Polarity: DCEN
E6013: 1/16",3/32",1/8" - Polarity: DCEN, DCEP
E7014: 1/16",3/32",1/8" - Polarity: DCEN, DCEP
E7018: 1/16",3/32",1/8" - Polarity: DCEP
The rated Duty cycle refers to the amount of welding that can be done within an amount of time. The Eastwood MP200i has a duty cycle of 20% at 200 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 200 Amps with a 20% Duty Cycle, within a 10 Minute block of time you can weld for 2 Minutes with 8 Minutes of cooling for the Welder.
If the Duty Cycle is exceeded, the Welder will automatically shut off, however the fan will continue running to cool the overheated components. When a safe temperature has been reached, the Welder will automatically switch the Welder output back on. To increase the duty cycle you can turn down the Voltage Output control.
Always wear dry, protective clothing and leather welding gloves and insulated footwear. Use suitable clothing made from
durable flame-resistant material to protect your skin. Thoroughly read and understand this manual before using.
Click here to see safety products
Questions & Answers